 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| © Copyright 2010 George Knives, Inc |
| XM-7 EOD Combat Knife |
- 6 in (152mm) long, 1/4” (6.4mm) thick blade
- Full mortise tang construction
- G-10 grip with integral hand guard
- 11.25 inches over all
- Spec.-Ops. Brand, Combat Master, Knife Sheath
- $375.00
The XM-7 Knife has been developed
and feedback from USMC Explosive
Ordnance Disposal Technicians both at
home and in multiple combat zones.
It provides a solid tool to pry,
hammer, chop, probe and stab. The
Tanto point allows most of the
damage from the abuse of digging to
be focused there and leave the main
edge for whatever else may arise. The
Asymmetrical, chisel style grinding
allows for multiple and varied angles of
attack when prying in tight quarters.
The G-10 Grip is CNC machined to
provide maximum grip, and control,
with or without gloves. The G-10
material is virtually impervious to all of
the conditions that an operator can
survive in. The wrapped construction
shields the tang from the elements
and minimizes the chances that
corrosion is able to build under the
handle.
Currently the blades are CPM 154,
commercially heat treated and
individually tested to a Rockwell
Hardness of 59C. This is subject to
change and operator feedback and
needs change in different areas of
operation.
and feedback from USMC Explosive
Ordnance Disposal Technicians both at
home and in multiple combat zones.
It provides a solid tool to pry,
hammer, chop, probe and stab. The
Tanto point allows most of the
damage from the abuse of digging to
be focused there and leave the main
edge for whatever else may arise. The
Asymmetrical, chisel style grinding
allows for multiple and varied angles of
attack when prying in tight quarters.
The G-10 Grip is CNC machined to
provide maximum grip, and control,
with or without gloves. The G-10
material is virtually impervious to all of
the conditions that an operator can
survive in. The wrapped construction
shields the tang from the elements
and minimizes the chances that
corrosion is able to build under the
handle.
Currently the blades are CPM 154,
commercially heat treated and
individually tested to a Rockwell
Hardness of 59C. This is subject to
change and operator feedback and
needs change in different areas of
operation.
 |